Maico easyTymp Operation Manual page 37

-
In the upper right corner the battery status is indicated
easyTymp is placed in the cradle, it will charge the battery and a flashing battery
icon will be shown.
-
In the upper right corner an icon indicates if the easyTymp is testing the left ear
or right ear
-
second line shows the name of the protocol which is in use. As soon as the
easyTymp detects that the probe is in the ear, the second line will show which
test of the protocol is running.
Operating from this screen:
Putting the probe in the ear and obtaining a seal will automatically start the test.
-
: The top left button will bring you to the Select Test screen where you
can select a different test protocol.
-
: The top middle button will bring you to the Patient screen where
patient data can be viewed or changed and earlier sessions can be reviewed
and/or printed. This function is only displayed if the patient management is
activated.
-
: Top right button will interrupt the test and Done! will appear in the
upper left hand corner of the screen. When the measurement is stopped the top
buttons will change to give the option to print or delete.
-
arrows will select respectively right or left ear for testing.
-
If data on one or both ears is still available, the up and down buttons will bring
you back to the Done! screen and allow you scroll through the measurement
results.
When the probe is in an ear the button will interrupt the testing and bring you to the Done!
screen. To return to the Test screen, press print, save or delete results.
If a protocol includes an instruction message, pressing the Contra Probe button results in
continuing the protocol, no matter what the probe status indicates.
8108757 Rev. 3
Operation Manual easyTymp
.
34
When entering the Test screen, the
. When the
15/11/2016