Managing Test Results - Maico easyTymp Operation Manual

5.5.20 Setup Patient Management
Figure 50
5.5.21 About
Figure 51
5.5.22 easyTymp Pro Version: Contra Probe Button
The Contra Probe button will change ears as long as the probe detects it is not in the ear.
When the probe is in an ear it will interrupt the testing and bring you to the Done! Screen,
and from there also back to the Test screen with a second press of the button. If a protocol
includes an instruction message, pressing the Contra Probe button results in continuing
the protocol, no matter what the probe status.

5.6 Managing Test Results

5.6.1 General
Dependent on the configuration there are different possibilities to manage test results. It
is possible to delete test results, print the session directly with the thermal printer or
transfer the data to a PC for further processing.
5.6.2 Deleting Test Results
The procedure of deleting test results depends on whether patient management is active
or not.
8108757 Rev. 3
Operation Manual easyTymp
Turns the internal patient data management "on" or
"off" (Figure 50).
NOTE: When changing from "On" to "Off", all
measured and/or stored data will be deleted.
About displays the firmware version and calibration
dates (Figure 51).
44
15/11/2016