Changes for Revision C1 of the
Revision C1 of the AutoSet 1500 User Manual covers all AutoSet 1500
Change(s) for Revision C1 include:
Label Switch 2 in location figure. (Figure 2-2, Chapter 2)
Designate correct switch for "Zero Set". ("Zeroing strain links",
DURING TROUBLESHOOTING WITH DI TECH SUPPORT!
Whenever you need to contact Data Instruments for technical assistance, be
ready to provide some important information to expedite a resolution to the
problem. Please supply: product name (e.g. AutoSet); model (e.g. 1500 or
1504); type (e.g. standard or plus); and firmware version number (e.g. Vs.
2.00). You can determine firmware version number from the chip on the
processor board (see "location of components" in Chapter 2).
AutoSet 1500 User Manual
PROVIDE IMPORTANT INFO