Hirschmann BAT54-F User Manual page 9

Dual-band industrial access point / access client / access bridge bat family
Hide thumbs Also See for BAT54-F:
Table of Contents

Advertisement

Warning
When you mount devices outside buildings, there is a risk of
them being struck by lightning. Additionally, there is the danger
of voltage strikes being transmitted into the interior of the
building.
See the information in the "WLAN Outdoor Guide", chapter "Lightning
and Surge Voltage Protection".
Make sure that your plant designer or installer has carried out suitable
lightning prevention measures.
Qualification requirements for personnel
Qualified personnel as understood in this manual and the warning signs,
are persons who are familiar with the setup, assembly, startup, and
operation of this product and are appropriately qualified for their job. This
includes, for example, those persons who have been:
trained or directed or authorized to switch on and off, to ground and to
label power circuits and devices or systems in accordance with current
safety engineering standards;
trained or directed in the care and use of appropriate safety equipment
in accordance with the current standards of safety engineering;
trained in providing first aid.
General safety instructions
Electricity is used to operate this equipment. Comply with every detail of
the safety requirements specified in the operating instructions regarding
the voltages to apply (see
Non-observance of these safety instructions can therefore cause material
damage and/or serious injuries.
Only appropriately qualified personnel should work on this device or in
its vicinity. These personnel must be thoroughly familiar with all the
warnings and maintenance procedures in accordance with this
operating manual.
The proper and safe operation of this device depends on proper
handling during transport, proper storage and assembly, and
conscientious operation and maintenance procedures.
Never start operation with damaged components.
Only use the devices in accordance with this manual. In particular,
observe all warnings and safety-related information.
Any work that may be required on the electrical installation may only
be carried out by personnel trained for this purpose.
BAT-F, BAT-Rail, BAT54, BAT300
Release 02 07/10
page
6).
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bat300-fBat54-f singleBat54-railBat300-railBat54-rail singleBat54-rail client

Table of Contents