Bat54-F Single - Hirschmann BAT54-F User Manual

1.2.2

BAT54-F Single

The device is equipped with the following connectors and operation
elements:
9
Main 1
IP67 WLAN Access Point
1 TX
2 RX
2 3
3 N.C.
4 GND
1 4
Function
Pin
V.24 Reset
1 2
Interfaces and display and control elements
1 V.24 Serial interface, 4-pin M12 socket with A coding, data rate min. 19.2 kbit/s, max.
115 kbit/s, connector for serial configuration cable
2 Reset Reset button behind a removable IP67 cap
restarts the device or resets the configuration
3 Ethernet Second Ethernet port
2 4-pin M12 socket with D coding, 10/100BASE-TX, Autosensing, Power over
Ethernet (PoE), automatic MDI/MDIX recognition (no crossover cable required)
4 Ethernet First Ethernet port
1 4-pin M12 socket with D coding, 10/100BASE-TX, Autosensing, Power over
Ethernet (PoE), automatic MDI/MDIX recognition (no crossover cable required)
5 LED 4 display elements (power, LS/DA1, LS/DA2, WLAN)
6 AUX Auxiliary connector for the WLAN module for connecting external antennas
7 Main Main connector for the WLAN module for connecting external antennas
20
8 7
Main 2 AUX 1
BAT54-F
Uin : 24 VDC
Uin : 48 VDC
1 +24V DC
2 0 V
1 TD+
2 3
2 1 3 0 V
2 RD+
4 +24V DC
3 TD-
5 N.C.
4 RD- 3 4
1 4
5
Pin Function
Pin Function
Ethernet
Power
3 4
6
AUX 2
CLASS 2 Iin : 400 mA
CLASS 2 Iin : 170 mA (PoE)
P LS/DA
WLAN WLAN
1 2
LED
5 5
BAT-F, BAT-Rail, BAT54, BAT300
Power LS/DA
WLAN WLAN
1 2
Release 02 07/10