Hirschmann BAT54-F User Manual page 11

Supply the voltage to the device via a PoE Switch or via a power
unit that conforms to IEEE 802.3af.
You will find information on PoE-compatible Switches (Power over
Ethernet) from Schneider Electric at www.schneider-electric.com
Install an upstream filter on the 24V DC voltage supply. You will find
information on suitable filters at www.schneider-electric.com.
Note: If you are using an E1-certified device in a vehicle and want to be
able to drive the vehicle freely within the EU, set the country profile for
Germany. This country profile is identical to all the country profiles for EU
countries. Do not, however, use any special frequencies, such as BFWA.
FCC note:
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
this device must accept any interference received, including
interference that may impede throughput.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
BAT-F, BAT-Rail, BAT54, BAT300
Release 02 07/10
11