Bat54-Rail - Hirschmann BAT54-F User Manual

1.2.5

BAT54-Rail

The device is equipped with the following connectors and operation
elements:
11
Main 1
1
2
3
4
Interfaces and display and control elements
1 ETH1 First Ethernet port
10/100BASE-TX, Autosensing, Power over Ethernet (PoE), automatic MDI/
MDIX recognition (no crossover cable required)
2 +24V Power, power supply connector for safety extra-low voltage (SELV/PELV)
0V
3 12V DC Power, power supply connector for safety extra-low voltage (SELV/PELV)
4 AUX 1 Auxiliary connector for the first WLAN module for connecting external antennas
5 AUX 2 Auxiliary connector for the second WLAN module for connecting external
antennas
6 V.24 Serial interface, data rate min. 19.2 kbit/s, max. 115 kbit/s, connector for serial
configuration cable
7 Reset Reset button to restart device or reset the configuration
8 LED 4 display elements (power, M1, WLAN1, WLAN2)
9 ETH2 Second Ethernet port
10/100BASE-TX, Autosensing, Power over Ethernet (PoE), automatic MDI/
MDIX recognition (no crossover cable required)
10 Main 2 Main connector for the second WLAN module for connecting external antennas
11 Main 1 Main connector for the first WLAN module for connecting external antennas
BAT-F, BAT-Rail, BAT54, BAT300
Release 02 07/10
WLAN1
Aux1
Main 2
M1
WLAN2
BAT54-Rail
Aux2
10
9
8
7
6
5
23