Bat300-Rail - Hirschmann BAT54-F User Manual

1.2.8

BAT300-Rail

The device is equipped with the following connectors and operation
elements:
10
1
2
3
Interfaces and display and control elements
1 ETH1 First Ethernet port
10/100BASE-TX, Autosensing, Power over Ethernet (PoE), automatic MDI/
MDIX recognition (no crossover cable required)
2 +24V Power, power supply connector for safety extra-low voltage (SELV/PELV)
0V
3 12V DC Power, power supply connector for safety extra-low voltage (SELV/PELV)
4 V.24 Serial interface, data rate min. 19.2 kbit/s, max. 115 kbit/s, connector for serial
configuration cable
5 Reset Reset button to restart device or reset the configuration
6 LED 2 display elements (power, WLAN)
7 ETH2 Second Ethernet port
10/100BASE-TX, Autosensing, Power over Ethernet (PoE), automatic MDI/
MDIX recognition (no crossover cable required)
8 Antenna Main connector for the WLAN module for connecting the third external
3 antenna
9 Antenna Main connector for the WLAN module for connecting the second external
2 antenna
10 Antenna Main connector for the WLAN module for connecting the first external
1 antenna
26
9
BAT300-Rail
BAT-F, BAT-Rail, BAT54, BAT300
8
7
6
5
4
Release 02 07/10