Bat-Rail; Basic Set-Up - Hirschmann BAT54-F User Manual

When you want to use the reset button, remove the cover cap.
Note: After pressing the reset button, replace the cover cap. Protection class
IP67 is only achieved when the cover cap is closed.
2.18.3

BAT-Rail

In the BAT-Rail, the reset button (see (1) in the following figure) is located on
the front plate of the device.
BAT54-Rail
Aux2
Figure 21: Reset button on BAT-Rail
2.19

Basic set-up

Information on the basic settings of the device can be found in the
"ConneXium WiFi TCSG,TSCN Configuration and Administration Guide" on
the CD ROM.
Default settings
You will find information on the delivery state of the device in the "Dual-
Band Industrial Access Point / Access Client / Access Bridge BAT54-Rail"
user manual.
54
1
BAT-F, BAT-Rail, BAT54, BAT300
Release 02 07/10