Safety Precautions; General Safety Precautions; B.1 S Afety P Recautions - IEI Technology ECW-281B-BTi User Manual

ECW-281B-BTi Embedded System
WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the ECW-281B-BTi.
B.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
B.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
 Follow the electrostatic precautions outlined below whenever the
ECW-281B-BTi is opened.

Make sure the power is turned off and the power cord is disconnected
whenever the ECW-281B-BTi is being installed, moved or modified.

Do not apply voltage levels that exceed the specified voltage range.
Doing so may cause fire and/or an electrical shock.
 Electric shocks can occur if the ECW-281B-BTi chassis is opened when the
ECW-281B-BTi is running.
 Do not drop or insert any objects into the ventilation openings of the
ECW-281B-BTi.

If considerable amounts of dust, water, or fluids enter the ECW-281B-BTi,
turn off the power supply immediately, unplug the power cord, and contact the
ECW-281B-BTi vendor.

DO NOT:
o Drop the ECW-281B-BTi against a hard surface.
o In a site where the ambient temperature exceeds the rated temperature
Page 105