2816 Pci 155 Mbps Multi-Mode Fiber Oc3 Atm Ioa; 2818 Pci 155 Mbps Single-Mode Fiber Oc3 Atm Ioa; 2866 Pci Integrated Netfinity Server - IBM i series Handbook

System Expansion Unit (#7102). The maximum is two. Technical specifications and industry
standards supported are available at the ATM Forum Web site:

#2816 PCI 155 Mbps Multi-Mode Fiber OC3 ATM IOA

This feature allows the AS/400 system to be attached to an Asynchronous Transfer Mode
(ATM) network using the Multi-Mode Fiber (MMF) 62.5 micron interface. This interface is
intended for connection to both local area switches and direct connection to service provider
equipment. The #2816 is typically used where 155 Mbps speeds are required over distances
of less than 2 km. It uses one high-speed slot but cannot be placed in the Base System Unit.
It attaches in slot E08 and E03 (where #2824 is a prerequisite) of the System Expansion Unit
(#7102). The maximum is two. Technical specifications and industry standards supported are
available at the ATM Forum Web site:

#2818 PCI 155 Mbps Single-Mode Fiber OC3 ATM IOA

This feature allows the AS/400 system to be attached to an Asynchronous Transfer Mode
(ATM) network using the Single-Mode Fiber (SMF) 9 micron interface. This interface is
intended primarily for direct connection to service provider equipment but can be used for
local area switches. The #2818 is typically used where 155 Mbps speeds are required over
distances from 16 to 40 km. It uses one high-speed slot, but cannot be placed in the Base
System Unit. It can attach in slots E08 and E03 (where #2824 is a prerequisite) of the System
Expansion Unit (#7102). The maximum is two. Technical specifications and industry standards
supported are available at the ATM Forum Web site:

#2866 PCI Integrated Netfinity Server

The Integrated Netfinity Server contains an Intel 333 MHz Pentium II Processor, four main
storage slots, and two LAN IOA slots. The adapter requires two reserved PCI card positions:
one for the processor card and the second for the bridge card to interface the processor card
to the AS/400e server. A maximum of two #2866 Integrated Netfinity Servers are supported:
one in the Base System Unit and one in the System Expansion Unit (#7102).
The Integrated Netfinity Server provides high-performance LAN serving to LAN-attached
PCs. OS/2 Warp Server for AS/400, Novell IntraNetWare, Lotus Domino, Flowmark, Firewall
for AS/400, or Microsoft Windows NT and Windows 2000 servers are supported on the
Integrated Netfinity Server.
The Integrated Netfinity Server comes with no base main memory and supports up to four of
the following features:
• #2861 32M IOP Memory Card
• #2862 128M IOP Memory Card
• #2867 256M IOP Memory Card
Each LAN slot can contain either a Token-Ring or an Ethernet IOA from the following list:
iSeries Model 250 Packages and AS/400e Server 250
http://www.atmforum.com
http://www.atmforum.com
iSeries Model 250 Packages and AS/400e Server 250
http://www.atmforum.com
105