IBM i series Handbook page 264

iSeries Model SB3
– Provides support for base Console/Workstation IOA
The configurator determines which feature combinations will be on the order based on
the System Console specify – #5540, #5544, #5546, or #5548.
• #9771 Base PCI 2-Line WAN w/Modem
Note : In countries where the #9771 is not homologated, the marketing configurator
adds a #4745 PCI Two line WAN IOA, a #0032 modem feature, and a #0348 cable to the
order. The #4745 is mandatory and cannot be removed from the system until the #9771
homologation is completed. The #0032 and #0348 features may be removed from the
order or system at any time.
These features are required:
• Processor (one must be specified)
– #2316 12-way processor (iStar) (10000 CPW)
– #2318 24-way processor (iStar) (16500 CPW)
• Integrated Disk Units
Device Parity Protection: All (0041) is the default for disk data protection but may be
removed. With processor #2316, a minimum of four and a maximum of six disk units must
be on the order. If six of the 17.54 GB disk units are on the order, RAID or mirroring is
required to meet the maximum logical disk unit capacity limit. With processor #2318,
order a minimum of four and a maximum of eight of the following disk units. If eight
17.54 GB disk units are on the order, RAID or mirroring is required to meet the maximum
logical disk unit capacity limit.
– #4317 - 8.58 GB 10k RPM Disk Unit
– #4318 - 17.54 GB 10k RPM Disk Unit
• Integrated CD-ROM and DVD-RAM
– #4425 - CD-ROM
– #4430 - DVD-RAM
• System Console/Communications Adapter
The console on LAN options require a dedicated LAN adapter. A #0367 Operations
Console PCI Cable will also be added to the order by the marketing configurator.
– #5540 System Console on twinaxial workstation controller
#4746 PCI Twinaxial IOA
– #5544 System Console on #9771 WAN Adapter
#0367 Operations Console PCI Cable
– #5546 System Console on 100 Mbps Token Ring
#2744 PCI 100Mbps Token-Ring IOA (Console)
234
iSeries Handbook