I/O Adapters And Controllers; Homologation - IBM i series Handbook

Hide thumbs Also See for i series:

Table of Contents

I/O Adapters and Controllers

This chapter discusses system unit (PCI) and migration tower (PCI and SPD) I/O adapters for

270, 8xx, SB2, and SB3 processors and associated towers.

Homologation is the process to obtain country government approval to ship a device and

connect it to the country telecommunications network. The action is similar to Federal

Communications Commission (FCC) approval in the United States.

There are features on the system that require homologation by country government

organizations, usually Post Telephone and Telegram departments (PTTs). This table lists

features as examples of those that must meet specific homologation regulations in each

country before they can be ordered and delivered.

The following table summarizes the PCI features that may require homologation in certain

countries. The features are described in detail later in this chapter.

Feature Code

High speed modem

PCI ISDN Bri U IOA - 2-wire

PCI ISDN Bri S/T IOA - 4-wire

Integrated Analog Modem

Two line WAN with integrated modems

PCI Quad Modem IOA

PCI ISDN Bri U IOA - 2-wire

PCI ISDN Bri S/T IOA 4-wire

Integrated Analog Modem

Base PCI Two-Line WAN with Modem

I/O Adapters and Controllers

Show Quick Links

Table of Contents