System Power - IBM i series Handbook

iSeries Model 840
uninterrupted for longer than thirty seconds when utility power is lost. It also maintains power
long enough to ensure that the system successfully completes a shutdown to avoid losing
data.

System Power

• Processor side, 8/12-Way, 12-Way, and 12/18-Way
– Bulks (1000 watt) (CCIN 5154) (Quantity four)
– Programmable Regulators (CCIN 2730) (Quantity eight)
– #2730 Programmable Regulator (Quantity two) required if #3196 8 GB Main Storage
cards are installed
– Memory Control Regulator (CCIN 2716)
– Processor Regulators (CCIN 2714) (Quantity two)
– Charger
– Battery Pack
– SPCN Card (CCIN 285E)
– AC Power Supply Country Specific Usage
• Processor side, 18/24 and 24-Way
– Bulks (1000 watt) (CCIN 5154) (Quantity five)
– Programmable Regulators (CCIN 2730) (Quantity nine)
– #2730 Programmable Regulator (Quantity two) required if #3196 8 GB Main Storage
cards are installed
– Memory Control Regulator (CCIN 2716)
– Processor Regulators (CCIN 2714) (Quantity two)
– Charger
– Battery Pack
– SPCN Card (CCIN 285E)
– AC Power Supply Country Specific Usage
• Base I/O Tower (#9079)
– Bulks (765 Watt) (CCIN 515A) (Quantity two)
– Batteries (Quantity four)
– AC Input/Charger
• Dual Line Cord - 840 CEC (#5104)
Provides dual line cord capability for the Model 840 system unit, #9079 base I/O tower,
and lower unit of the #8079 Optional Base I/O Tower.
– Two #14XX line cords are required on the Model 840 and two on the #9079 when the
#5104 is ordered initially or for upgrades to a new Model 840. When ordered as an
MES, an additional 14XX line cord for the system unit and one for the #9079 are
required.
190
iSeries Handbook