Card Technology - IBM i series Handbook

iSeries Model SB2
These features are required:
• Processor
#2315 Model SB2 8-way Processor (iStar) (CCIN 2315)
• Integrated Disk Units
Device Parity Protection: All (0041) is the default for disk data protection but may be
removed from the order. Select four disk units. If four 17.54 GB disk units are selected,
then RAID or mirroring must also be selected to meet the maximum logical DASD
capacity limit.
– #4317 - 8.58 GB 10k RPM Disk Unit
– #4318 - 17.54 GB 10k RPM Disk Unit
• Integrated CD-ROM and DVD-RAM
– #4425 - CD-ROM
– #4430 - DVD-RAM
• System Console/Communications Adapter
The console on LAN options require a dedicated LAN adapter. A #0367 Operations
Console PCI Cable will also be added to the order by the marketing configurator.
– #5540 System Console on twinaxial workstation controller
#4746 PCI Twinaxial IOA
– #5544 System Console on #9771 WAN Adapter
#0367 Operations Console PCI Cable
– #5546 System Console on 100 Mbps Token Ring
• #2744 PCI 100 Mbps Token-Ring IOA (Console)
• #0367 Operations Console PCI Cable
– #5548 System Console on 100 Mbps Ethernet
• #4838 PCI 100/10 Mbps Ethernet IOA (Console)
• #0367 Operations Console PCI Cable
The server SB2 is a Customer Setup system. Refer to "Customer Install Features (CIF)" on
page 429.

Card Technology

The new hardware completes the transition to PCI I/O architecture with the introduction of
PCI architecture in all the 8xx systems. This I/O structure enables customer setup of selected
features on the SB2. It also enables Hot Plug PCI for adding and replacing hardware without
taking the server down.
226
iSeries Handbook