Network Setup - Kyocera FS-1028MFP Operation Manual

Default Setting (System Menu)

Network Setup

The following network settings are available.
• LAN Interface Setup ...8-128
• TCP/IP (IPv4) Setup ...8-129
• TCP/IP (IPv6) Setup ...8-129
• NetWare Setup ...8-130
• AppleTalk Setup ...8-132
• Protocol Detail ...8-135
LAN Interface Setup
Specify the settings for the LAN interface to be used. The default setting is Auto.
Use the procedure below to select the interface.
8-128
Downloaded From ManualsPrinter.com Manuals
Sys. Menu/Count.:a b
1 Report
2
Counter
3
********************* System
[ Exit
Login User Name:
*******************
Login Password:
[ Menu ] [ Login
System:
1
Network Setting
*********************
2 I/F Block Set.
3
Security Level
[ Exit
Network Setting: a b
1 *TCP/IP Setting
*********************
2 NetWare
3
AppleTalk
1
In the Sys. Menu/Count. menu, press the
key to select [System], and press the OK key.
]
When you are performing user management and
L b
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
]
2
The System menu appears.
a b
]
3
Press the
4
Press the OK key. The Network Setting menu
appears.
5
Press the
or key to select [Network Setting].
or key to select [LAN Interface].
OPERATION GUIDE
or