Kyocera FS-1028MFP Operation Manual page 313

Editing One-touch Key
Edit/delete the destinations you added to One-touch Key.
Use the procedure below to edit the one-touch key.
OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals
Select Key No.:
1
No. 1
*********************
2 No. 12
[ Exit
Key Edit:
1 Edit
2
Detail
3 Delete
[ Exit
Addressbook:
k Design
*********************
l Fiala
l Maury
[ Menu
1
In the basic screen, press the one-touch key where
a b
you want to edit the destination and hold it (2
seconds or longer). Select Key Set. appears.
The screen shown is the one when No.1/No.12 is
pressed and held.
]
2
Press the
where you want to edit the destination.
3
Press the OK key. The Key Edit appears.
a b
]
4
Press the
NOTE:
If you select [Delete] here and press the OK
key, you can delete the registration of the destination. If
you press [Yes] (the Left Select key) in the screen that
appears, Completed. is displayed and the registration
of the destination is deleted.
5
Press the OK key. The Address Book list screen
a b
appears.
]
6
Press the
want to newly register.
NOTE:
If you want to search from the Address Book,
refer to Search in Address Book on page 3-29.
Default Setting (System Menu)
or key to select the key number
or key to select [Edit].
or key to select the destination you
8
8-125