Kyocera FS-1028MFP Operation Manual page 273

Send Result Report
Automatically print a report of transmission result when a transmission is complete. The table below shows the
available settings. The default setting is Error Only.
Use the procedure below to send a Result Report.
OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals
Item
Off
On
Error Only
Sys. Menu/Count.:a b
1 Report
*********************
2 Counter
3
System
[ Exit
Report:
1 Report Print
*********************
2 Admin Rpt Set.
3
Result Rpt Set.
[ Exit
Result Rpt Set.: a b
1
********************* Send Result
2 FAX RX Result
3
JobFinish Notice
[ Exit
Description
No result report printed.
Result report automatically printed.
Transmitted images can also be attached.
Result report printed only when a
transmission ends in an error. If two or
more destinations are registered, the
reports are printed only for the destinations
with the errors. Transmitted images can
also be attached.
1
In the Sys. Menu/Count. menu, press the
key to select [Report].
]
2
Press the OK key. The Report menu appears.
a b
]
3
Press the
4
Press the OK key. The Result Rpt Set. menu
appears.
]
Default Setting (System Menu)
or key to select [Result Rpt Set.].
or
8
8-85