Kyocera FS-1028MFP Operation Manual page 320

Default Setting (System Menu)
AppleTalk Setup
Select the Apple Talk network connection.
Refer to AppleTalk Setup on page 2-22 about the procedures.
WSD Scan Setup
Select whether or not to use WSD Scan. The default setting is On.
Use the procedure below to setup the WSD-SCAN setting. The machine must be restarted after the setting is
changed.
8-132
Downloaded From ManualsPrinter.com Manuals
Sys. Menu/Count.:a b
1
Report
2
Counter
3 System
*********************
[ Exit
Login User Name:
*******************
Login Password:
[ Menu ] [ Login
System:
1 Network Setting
*********************
2
I/F Block Set.
3
Security Level
[ Exit
Ether-II
802.2
SNAP
8
Press the OK key. Completed. is displayed and the
screen returns to the Network Setting menu.
For detailed information on restarting the system,
refer to Restarting the System on page 8-127.
1
In the Sys. Menu/Count. menu, press the
key to select [System], and press the OK key.
]
When you are performing user management and
L b
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
]
2
The System menu appears.
a b
]
3
Press the or key to select [Network Setting].
OPERATION GUIDE
or