Kyocera FS-1028MFP Operation Manual page 319

OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals
Sys. Menu/Count.:a b
1
Report
2 Counter
3 System
*********************
[ Exit
Login User Name:
*******************
Login Password:
[ Menu ] [ Login
System:
1 Network Setting
*********************
2
I/F Block Set.
3 Security Level
[ Exit
Network Setting: a b
1 TCP/IP Settings
*********************
2 NetWare
3 AppleTalk
[ Exit
NetWare:
1 *Off
*********************
2 On
Frame Type:
1 *Auto
*********************
2 802.3
3
Ether-II
1
In the Sys. Menu/Count. menu, press the
key to select [System], and press the OK key.
]
When you are performing user management and
L b
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
]
2
The System menu appears.
a b
]
3
Press the
4
Press the OK key. The Network Setting menu
appears.
]
5
Press the
6
Press the OK key. NetWare appears.
a b
7
Press the
If you select [On] and press the OK key, Frame
a b
Type appears. Press the
desired frame type.
The available frame types are as follows:
Auto
802.3
Default Setting (System Menu)
or key to select [Network Setting].
or key to select [NetWare].
or key to select [On] or [Off].
or key to select the
or
8
8-131