Subnet Mask - Kyocera FS-1028MFP Operation Manual

Preparation before Use
2-16
Downloaded From ManualsPrinter.com Manuals

Subnet Mask:

123.145.167.189
IPv4 Setting:
3 IP Address
4 Subnet Mask
5
********************* Default Gateway
[ Exit
Default Gateway: a b
123.145.167.189
23
Press the OK key. Subnet Mask appears.
a b
24
Use the arrow keys to enter the Subnet Mask.
Press the
horizontally.
Press the
the Subnet Mask. Each 3 digits can be set between
000 and 255.
IMPORTANT:
[On], the current Subnet Mask is displayed and cannot
be changed.
When setting an Subnet Mask, set the DHCP Setting
(page 2-18) to Off.
25
Press the OK key. Completed. is displayed and the
screen returns to the IPv4 Setting menu.
26
Press the
a b
]
27
Press the OK key. Default Gateway appears.
28
Use the arrow keys to enter the Default Gateway.
Press the
horizontally.
Press the
the Default Gateway. Each 3 digits can be set
between 000 and 255.
or key to move the cursor position
or key or the numeric keys to enter
When the DHCP Setting (page 2-18) is
or key to select [Default Gateway].
or key to move the cursor position
or key or the numeric keys to enter
OPERATION GUIDE