Kyocera FS-1028MFP Operation Manual page 278

Default Setting (System Menu)
New Developer
When the printing is too light or incomplete, even though there is enough toner, refresh the developer.
8-90
Downloaded From ManualsPrinter.com Manuals
Adjust/Maint.:
1 Copy Denst. Adj.
*********************
2
Send/Box Density
3 Correct. Bk Line
[ Exit
Correct. Bk Line: a b
1 *Off
*********************
2 On(Low)
3 On(High)
Sys. Menu/Count.:a b
; Document Box
<
Edit Destination
=
********************* Adjust/Maint.
[ Exit
Adjust/Maint.:
1
Copy Denst. Adj.
*********************
2 Send/Box Density
3
Correct. Bk Line
[ Exit
Service Setting: a b
1
Service Status
*********************
2
Network Status
3
New Developer
[ Exit
2
Press the OK key. The Adjust/Maint. menu
a b
appears.
]
3
Press the
4
Press the OK key. Correct. Bk Line appears.
5
Press the
[On(High)].
6
Press the OK key. Completed. is displayed and the
screen returns to the Adjust/Maint. menu.
1
In the Sys. Menu/Count. menu, press the
key to select [Adjust/Maint.].
]
2
Press the OK key. The Adjust/Maint. menu
a b
appears.
]
3
Press the
4
Press the OK key. The Service Setting menu
appears.
]
or key to select [Correct. Bk Line].
or key to select [Off], [On(Low)] or
or key to select [Service Setting].
OPERATION GUIDE
or