Kyocera FS-1028MFP Operation Manual page 327

IPP Security
Specify the protocol to be used for IPP. The default setting is IPP/IPP over SSL.
Use the procedure below to make the setting.
OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals
Network Setting: a b
7 Secure Protocol
*********************
8 Host Name
9 LAN Interface
[ Exit
Secure Protocol: a b
1 SSL
*********************
2 IPP Security
3 HTTP Security
[ Exit
SSL:
1 *Off
*********************
2 On
[ Exit
Sys. Menu/Count.:a b
1
Report
2 Counter
3 System
*********************
[ Exit
Login User Name:
*******************
Login Password:
[ Menu ] [ Login
4
Press the OK key. The Network Setting menu
appears.
]
5
Press the
6
Press the OK key. Secure Protocol appears.
]
7
Press the
8
Press the OK key. SSL appears.
a b
]
9
Press the
10
Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
1
In the Sys. Menu/Count. menu, press the
key to select [System], and press the OK key.
]
When you are performing user management and
L b
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
]
Default Setting (System Menu)
or key to select [Secure Protocol].
or key to select [SSL].
or key to select [On] or [Off].
8
or
8-139