Wsd Scan - Kyocera FS-1028MFP Operation Manual

WSD Scan

WSD Scan saves images of originals scanned on this machine as files on a WSD-compatible computer.
NOTE:
For information on operating the computer, refer to the operating system help for your computer.
To use WSD Scan, WSD Scan Setup (page 8-132) must be set to [On] in the network settings.
Procedure using computer
Procedure using this machine
OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals
Send to:
2 G Folder(SMB)
3 H Folder(FTP)
4 F WSD Scan
*********************
1
Install the WIA driver on your computer in the
custom mode from the supplied CD-ROM (Product
Library).
NOTE:
For details of installation for WIA driver, refer to
Setup Guide.
2
Select Start button of the Windows display, and
then Network.
3
Select the machine displayed Multifunctional
Devices, and then right-click Install.
Installing of the driver starts.
4
After installing the driver, click Close.
1
Press the Send key.
2
Place the originals in the document processor or on
the platen.
Displays the screen for sending.
NOTE:
Depending on the settings, the address book
screen may appear. In this event, press [Cancel] to
display the screen for sending.
3
Press the
a b
Sending Functions
or key to select [WSD Scan].
5
5-19