Kyocera FS-1028MFP Operation Manual page 196

Default Setting (System Menu)
Original/Paper Settings
Register additional types and sizes of originals and paper.
Custom Original Size Setup
Set up frequently-used custom original size. The dimensions available are as follows.
The table below lists the sizes that can be registered.
Use the procedure below to set a custom original size.
8-8
Downloaded From ManualsPrinter.com Manuals
Input units
Inch models X: 1.97 to 14.02" (in 0.01" increments)
Y: 1.97 to 8.50" (in 0.01" increments)
Metric models X: 50 to 356 mm (in 1 mm increments)
Y: 50 to 216 mm (in 1 mm increments)
Sys. Menu/Count.: a b
4
User/Job Account
5 User Property
6 Common Settings
*********************
[ Exit
Common Settings: a b
1 Language
*********************
2 Default Screen
3 Sound
[ Exit
Orig./Paper Set.: a b
1 Custom Orig.Size
*********************
2
Def. Orig. Size
3 Custom PaperSize
[ Exit
Size Entry(Y):
(1.97 - 8.50)
x ***7.00*"
Dimensions
1
In the Sys. Menu/Count. menu, press the
key to select [Common Settings].
]
2
Press the OK key. The Common Settings menu
appears.
3
Press the
]
4
Press the OK key. The Orig./Paper Set. menu
appears.
5
Press the
]
6
Press the OK key. Size Entry(Y) appears.
D b
7
Use the numeric keys to enter the paper length (Y).
or key to select [Orig./Paper Set.].
or key to select [Custom Orig.Size].
OPERATION GUIDE
or