Icd Group Features - Panasonic KX-NS1000 Operating Manual

To set/cancel
PT/SLT/PS
Off-hook.
To dial
PT/SLT/PS
Off-hook.
•
To call another party, dial the desired party's phone number before the preprogrammed
number is dialed.
•
You should assign the intercom line as the seized line when going off-hook. (Preferred Line
Assignment—Outgoing)
•
It is possible to increase the delay before Hot Line is activated through system programming.
This can be useful if you require more time after going off-hook to dial another telephone
number or extension number.
Customizing Your Phone
•
3.1.2 Personal Programming—Preferred Line Assignment—Outgoing
Select the seized line when going off-hook.

1.3.36 ICD GROUP FEATURES

An incoming call distribution (ICD) group is a group of extensions assigned through system programming to
receive calls (for example, as a call center). The PBX has several features that support using extensions in
ICD groups, as follows:
Features
Log-in/Log-out
Supervisory Features
Document Version 2013-04
7 4 0
Enter 740.
You can log in to or out of an ICD group, to control whether you receive calls
from the group.
(® 1.3.39 ICD Group Features—Log-in/Log-out)
An extension assigned as a supervisor (supervisor extension) can monitor
and control the status of each member within the ICD group, using a 6-line
display PT.
(® 1.3.42 ICD Group Features—Supervisory)
1.3.36 ICD GROUP FEATURES
1
Set
OR
0
Cancel C.Tone
Enter 1 to set
or 0 to cancel.
Description
On-hook.
Operating Manual 107