Panasonic KX-NS1000 Operating Manual page 300

3.2.1 User Programming
Personal Custom Service
Item
Personal Custom Service
Outside Numbers
300 Operating Manual
Specifies the Personal Custom Service.
Note
•
Make sure to add a CO line access number when you store an outside
telephone number.
•
If you are using a PRI line, you may need to enter # at the end of
outside telephone numbers.
Follow the steps below to edit a Personal Custom Service.
1.
Click Edit.
2.
For each Key, specify an Assigned Operation.
3.
For each Assigned Operation that is specified, specify a Value from the
following.
•
Transfer to specified mailbox: Allow the caller to leave messages
in a specified mailbox.
•
Transfer to specified extension: Transfers the caller to a specified
extension.
•
Transfer to Voice Mail Service: Allows the caller to access Voice
Mail Service.
•
Transfer to Automated Attendant Service: Allows the caller to
access Automated Attendant Service.
•
Transfer to specified Custom Service Menu: Transfers the caller
to the Custom Service specified here.
•
Transfer to operator: Connects the caller to an operator.
•
Transfer to outside (specified number): Transfers the caller to a
specified outside telephone number. Enter the PBX CO line access
number, such as 9.
•
Page the party: Pages you.
•
Repeat greeting: Repeats the greeting.
•
None: No operation assigned.
4.
Click OK when finished.
Specifies the outside telephone numbers that can be used for the "Transfer
to outside (specified number)" operation in the Personal Custom Service
settings.
1.
Click Edit.
2.
Enter Outside Number #1–#4: Max. 32 digits consisting of 0–9,
special codes:
•
T: Dial Tone Detection
•
,: Dial Pause (default 1 s)
•
;: Dial Pause (default 3 s)
•
0–9, , #: Dial Code
3.
Click OK when finished.
Description
Document Version 2013-04
, #, and