Panasonic KX-NS1000 Operating Manual page 68

1.3.15 Conference
To disconnect one party and then talk to the other in a three-party conversation
PT/PS
During a conversation
Press TRANSFER once
or twice to establish a
conversation with the
party to be disconnected.
The other party will be put on hold.
•
•
•
•
•
•
Customizing Your Phone
•
Leaving Three-party Conference
The person who originated a conference with two other parties can leave the conference, and allow the other
parties to continue the conversation.
68 Operating Manual
*
Press
FLASH/RECALL.
* In this case, the FLASH/RECALL button on a proprietary telephone must be set to
Flash/Recall mode through system programming.
During a three-party conversation, pressing the TRANSFER button or Recall/
hookswitch alternates between the two other parties in the conversation.
You can have a conference with a maximum of eight parties (comprising intercom or
CO lines) simultaneously.
During a conversation involving four or more parties, you cannot disconnect one party
and maintain the conversation with the other parties.
Non-KX-UT series SIP phone users cannot originate a conference call, but can be
added as a member.
When a KX-UT series SIP phone user originates a conference call and one of the other
parties leaves the conference, the KX-UT series SIP phone user will still be able to talk
to the remaining party but will not be able to hold the call.
3.1.4 Customizing the Buttons
Create or edit a Conference button.
(CO)
OR
(ICD Group)
OR
(PDN)
OR
(SDN)
OR
Press the flashing CO, ICD Group,
PDN, SDN, or INTERCOM
corresponding to the original party.
Talk.
Document Version 2013-04