Panasonic KX-NS1000 Operating Manual page 326

5.2.1 Troubleshooting
Problem
I do not want to display a number which is
stored in memory.
I want to confirm my extension number.
The date and time are not correct.
The visibility of the display is poor.
I want to specify the ringing tones.
The MESSAGE button light has lit up.
An SDN button on my extension does not
work.
I cannot use the secondary Ethernet port.
326 Operating Manual
Remedy
•
Conceal the number.
( Storing New Names and Numbers,
3.1.4 Customizing the Buttons)
•
( Your Extension Number in 1.1.6 Before
Operating the Telephones)
•
Set the date and time by system programming.
Consult your dealer.
•
Change the Display contrast level.
( 3.1.2 Personal Programming)
•
( To specify the ringing tones for each CO, ICD
Group, PDN, SDN, or INTERCOM button (Digital
proprietary telephone only), 3.1.4 Customizing the
Buttons)
•
Another extension left you a message waiting
indication or someone left a message in your
mailbox while you were on the phone or away from
your desk.
•
A PDN button is not assigned on the extension
corresponding to your SDN button.
Create a PDN button on the desired extension.
( 3.1.4 Customizing the Buttons)
•
If you are using a KX-NT500 series telephone,
check whether ECO mode is enabled (
Display in 1.1.6 Before Operating the Telephones). If
it is enabled, ask your dealer to disable ECO mode.
For other types of IP-PTs, contact your dealer.
Document Version 2013-04