Panasonic KX-NS1000 Operating Manual page 243

Parameters
Auto Forwarding
Forwarding Mailbox
Number
Forwarding Delay Time
Forwarding Mode
To delete a mailbox
The System Manager should delete mailboxes that are no longer needed. When another person accesses the
Unified Messaging system, the action is automatically canceled.
1.
Log in to the System Manager's mailbox.
2.
5 1
3.
Enter the mailbox number.
4.
1 to delete the mailbox.
To reset a mailbox password
When a password is forgotten, the System Manager must reset the password before it can be reassigned by
the subscriber.
1.
Log in to the System Manager's mailbox.
2.
5 1
3.
Enter the mailbox number.
4.
1 to delete the password.
•
The System Manager password cannot be reset here. The System Administrator can reset
the System Manager password using Web Maintenance Console.
•
After the password is reset, if the System Administrator has set "Default Password for New
Mailboxes" to "Enable", the password will be set to the default password. If set to "Disable",
the mailbox will have no password.
Setting Class of Service (COS) Parameters
A Class of Service (COS) defines the set of system services available to the mailboxes assigned to it. There
are 64 Classes of Service; they can be assigned to mailboxes by the System Administrator using Web
Document Version 2013-04
1.
1 to change the current setting (enable or disable).
•
If set to "Disable":
The Auto Forwarding parameter is the last parameter to be entered.
To continue assigning or editing other mailboxes, go back to STEP
B.
To finish, enter
2.
2 to accept.
1.
1
to change the current setting.
2.
Enter the forwarding mailbox number.
3.
2 to accept.
1.
1
to change the current setting.
2.
Enter the delay time, and
3.
2 to accept.
1.
1
to change the current setting (Copy or Move).
2.
2 to accept, then go to "Auto Forwarding".
2
3
2.2.1 System Manager Features
Steps
.
# .
Operating Manual 243