Panasonic KX-NS1000 Operating Manual page 257

1.
Log in to the Message Manager's mailbox.
2.
2
3.
3 to assign a telephone number.
4.
Enter the desired number.
1
to change the first telephone number.
2 to change the second telephone number.
3 to change the third telephone number.
5.
1
to accept.
6.
Dial the telephone number.
7.
2 to accept.
8.
1
to change the telephone number.
2 to accept.
3 to review.
4 to add more digits.
5
to insert a pause.
6 to insert a wait for dial tone.
To set device status
For each device, the notification is enabled or disabled according to a preset schedule. The Message Manager
can enable a device according to a schedule. However, the System Administrator must first assign a
destination number to the desired device.
1.
Log in to the Message Manager's mailbox.
2.
2 2
3.
Enter the device number (1–6).
•
Device number 4, 5, or 6 is used to specify a device number that is "Device No. 1, 2, or 3" for
"E-mail/Text Message Device" in Web Maintenance Console.
•
If a telephone number has not been assigned to the selected device number 1, 2, or 3, you
cannot set the device status. Refer to "To assign notification numbers" to assign a telephone
number.
4.
Select the desired message type.
1 to notify all messages.
2 to notify urgent messages.
5.
Select when the device will be used for message notification.
1
for schedule (a notification is sent each time a message is received, but only during the
times programmed by the System Administrator).
2 for continuously.
3 for disable (notifications are not sent).
Customizing the Message Manager's Mailbox
The Message Manager can customize the Message Manager's mailbox by changing the following parameters.
–
The Message Manager's mailbox password
–
The extension numbers of Operator 1, 2, and 3
Document Version 2013-04
2.2.2 Message Manager Features
Operating Manual 257