Panasonic KX-NS1000 Operating Manual page 6

Feature Highlights
To transfer to an outside party using the PBX service
SIP Extn.
During a conversation
C.Tone
OR
HOLD
KX-UT series
only.
KX-UT series:
Press TRANSFER.
Other than KX-UT series:
Press HOLD.
To establish a conference call
KX-UT series
During a conversation
C.Tone
Press CONFERENCE.
To set/cancel Call Forwarding
PT/SLT/PS/SIP Extn.
Off-hook. Enter
destination
extension no.
OR
CO line
access no.
(max. 32 digits)
Enter destination extension number.
Or enter CO line access number
and then outside phone number.
For non-KX-UT series SIP phone users
a.
The following features are available for SIP phone users:
–
Making calls
–
Answering calls
–
Holding calls
–
Transferring calls (You cannot go on-hook before the transferred party answers.)
6 Operating Manual
outside
CO line
phone no.
Seize CO line. Dial outside phone
number.
desired
phone no.
Dial desired phone Talk to the
new party.
number.
Seize a CO line before dialing
an outside phone number.
Both Calls
0
OR
7 1 Outside Calls
1
OR
Intercom Calls
2
71. Enter 0 to 2 as
you desire.
outside
C.Tone
phone no.
Enter #.
Talk. On-hook.
This step can be omitted
(KX-UT series only).
C.Tone
Press CONFERENCE. Talk with multiple
parties.
For KX-UT670:
Press Start Conference.
Cancel
0
All Calls
2
Busy
3
No Answer
4
Busy/No Answer
5
Enter required
number.
For "Cancel", go on-hook
directly after entering 0.
On-hook.
For KX-UT series:
Press ENTER.
*
For KX-UT series:
Press ENTER.
After entering 0 for "Cancel",
for KX-UT series:
Press ENTER.
Go on-hook.
For KX-UT series:
Press ENTER.
Document Version 2013-04