Icd Group Features-Log-In/Log-Out - Panasonic KX-NS1000 Operating Manual

1.3.39 ICD Group Features—Log-in/Log-out
•
For information about other supervisory features, refer to "1.3.42 ICD Group
Features—Supervisory".
1.3.39 ICD Group Features—Log-in/Log-out
You can control your status in an incoming call distribution
(ICD) group. When in the Log-out mode, incoming calls to
the group will not ring at your extension. When you return,
calls will again ring at your extension. (Default: Log-in)
Even if your extension is logged-in, you can have a
specified time period (wrap-up time) when you will not
receive calls after completing a previous call. This time can
be used for you to write a report and so on.
You can also manually select "Not Ready" mode to
temporarily leave an ICD group.
To set Log-in/Log-out
PT/SLT/PS/SIP Extn.
Off-hook.
ICD Group
extension no.
OR
Enter ICD Group
extension number or
110 Operating Manual
ICD Group: Incoming Call Distribution Group
7 3 6
736.
Enter
Specified
C.Tone
All
.
Talk.
Ready
Wrap-up
0
Log-out
OR
1
Log-in
Enter 0 or 1.
On-hook.
Log-out
Log-in
Not Ready
Document Version 2013-04