Connection Examples - External Devices; Using Headphones; Playing The Sounds Of The Electone Through An External Audio System - Yamaha STAGEA ELS-02 Owner's Manual

9 [USB TO DEVICE] terminals
For details on [USB TO DEVICE] terminal, see page 110.
USB Dock
) [USB TO HOST] terminal
This terminal can be connected to the USB terminal of
the computer using the USB cable. (The USB-MIDI
driver is necessary for the connection.)
Reference page
• Connection with Computer (page 191)
USB
USB is an abbreviation for Universal Serial Bus. It is a
serial interface for connecting a computer with
peripheral devices.
! MIDI IN/OUT terminals
For connecting external MIDI devices such a synthesizer
or sequencer. You can also use these to connect with a
computer that has a MIDI Interface.
Reference pages
• Controlling external MIDI devices from the Electone
(page 190)
• Controlling the Electone from an external device (page 190)
• Connection with Computer (page 191)
Connection Examples – External Devices
Connection Examples –
External Devices
CAUTION
Before connecting the Electone to other electronic
components, turn off the power to all the components.
Before turning the power of the components on or off, set all
volume levels to minimum (0). Otherwise, electrical shock or
damage to the components may occur.

Using headphones

To use headphones, connect them to one of the PHONES
jacks (standard 1/4" phone jacks). Two people can enjoy
listening to the Electone together by connecting two pairs
of headphones to the two jacks.
PHONES
Playing the sounds of the Electone
through an external audio system
By using the AUX OUT jacks, you can connect your
Electone to external speakers. If you're connecting the
Electone to a mono device, use only the AUX OUT L/
L+R jack (standard phone).
AUX OUT L/L+R R
Speaker (Left)
ELS-02/ELS-02C Owner's Manual
Speaker (Right)
13
187