Saving And Recalling Custom Panel Setups With Registration Memory - Yamaha PSR-SX900 Owner's Manual

Saving and Recalling Custom Panel Setups with Registration Memory

Registering Your Panel Setups
1
Make the desired panel Settings, such as those for Voices,
Styles and Effects.
2
Press the [MEMORY] button in the REGISTRATION MEMORY
section to call up the Registration Memory window.
Selecting the items to be registered
The Registration Memory window contains the list for selecting the items to be
registered. Before going on to step 3, enter or remove checkmarks by touching
the desired items. Items having checkmarks will be registered.
3
Press the desired REGISTRATION MEMORY [1]–[8] button to
which you wish to memorize the panel setup.
The memorized button lights in orange, which indicates that the button contains
data and its number is selected.
About the lamp status
• Orange: Data registered and currently selected
• Blue: Data registered but not currently selected
• Off: No data registered
4
Register various panel setups to other buttons by repeating
steps 1–3.
The registered panel setup can be recalled by simply pressing the desired number
button.
The list of items to be registered to
Registration Memory
NOTICE
If you selected a button whose
lamp is lit in orange or blue here,
the panel setup previously mem-
orized to the button will be erased
and replaced by the new settings.
NOTE
The panel setups registered in the num-
bered buttons are maintained even
when you turn off the power. If you want
to delete all eight current panel setups,
turn the power on while holding the B5
key (second right-most key) on the key-
board.
PSR-SX900/SX700 Owner's Manual
7
87