Saving The Registration Sequence Settings; Using The Registration Sequence - Yamaha PSR-SX600 Reference Manual

Saving the Registration Sequence Settings

The settings for the Sequence order and how Registration Sequence behaves when reaching the end of the
sequence (Sequence End) are included as part of the Registration Memory Bank file. To store your newly
programmed Registration Sequence, save the current Registration Memory Bank file.
1
Press the REGIST BANK [+] and [-] buttons simultaneously to call up the Registration
Bank Selection Display.
2
Press the [8 ] (File) button to save the Bank file.
For details, refer to "Basic Operations" in the Owner's Manual.

Using the Registration Sequence

1
Select the desired Registration Bank.
2
At the upper left of the Main display, confirm the Registration Sequence.
3
Press the TAB [E] or [F] button, or press the Foot Pedal to select the first Registration
Memory number.
The currently selected Registration Memory number will be highlighted.
4
Use the TAB buttons or Foot Pedal during your keyboard performance.
To return to the status in which no Registration Memory number is selected, press the TAB [E] and [F]
buttons simultaneously while the Main display is called up.
7
The pedal can be used for Registration Sequence even when the Main display is not shown.
You can also assign other functions to the pedal. These include Punch In/Out Song Recording
If you assign multiple functions to the pedal, the priority is: Punch In/Out Song Recording → Registration Sequence → Functions assigned to Foot
Pedal.
80
PSR-SX600 Reference Manual
(page 61) and Functions in the Foot Pedal page (page 95).