Bluetooth - Honeywell THOR VM1 User Manual

Bluetooth

(Start) > Control Panel > Bluetooth
Discover and manage pairing with nearby Bluetooth devices.
To use the Honeywell/Intermec SR61 Bluetooth scanner with the Thor VM1:
• The EZPair software must be version 2ab or greater. See the Bluetooth
version installed. Contact
• The EZPair bar code on the Thor VM1 cannot be used to connect the SR61 scanner. Follow this procedure:
1. Make sure the scanner is on and within range of the Thor VM1.
2. Tap the Discover button on the
3. From the list of discovered devices, tap the SR61 scanner and select Pair as a Scanner.
Factory Default Settings
Discovered Devices
Settings
Turn off Bluetooth
Computer is connectable
Computer is discoverable
Prompt if devices request to
pair
Continuous search
Filtered Mode
Printed Port - COM7:
Logging
Computer friendly name
Reconnect
Report when connection
lost
Report when reconnected
Report failure to connect
Clear Pairing Table on Boot Disabled
Auto Reconnect on Boot
Auto Reconnect
Bluetooth taskbar Icon state and Bluetooth device Icon states change as Bluetooth devices are discovered, paired, con-
nected and disconnected. There may be audible or visual signals as paired devices re-connect with the Thor VM1.
• The default Bluetooth setting is On.
• The Thor VM1 cannot be discovered by other Bluetooth devices when the Computer is discoverable option is disabled
(unchecked) on the Settings panel.
• Other Bluetooth devices cannot be discovered if they have been set up to be Non-Discoverable or Invisible.
• When Filtered Mode is enabled, the Thor VM1 can pair with one Bluetooth scanner and one Bluetooth printer.
• When Filtered Mode is disabled, the Thor VM1 can pair with up to four Bluetooth devices.
• It is not necessary to disconnect a paired scanner and printer before a different scanner or printer is paired with the Thor
VM1.
• The target Bluetooth device should be as close as possible (up to 32.8 ft (10 meters) Line of Sight) to the Thor VM1 during
the pairing process.
Assumption: The System Administrator has Discovered and Paired targeted Bluetooth devices for the Thor VM1. The Thor
VM1 operating system has been upgraded to the revision level required for Bluetooth client operation. An application (or
API) is available that will accept data from serial Bluetooth devices.
5 - 6
Technical Assistance
Bluetooth Devices
None
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled (unchecked) by default in both Filtered
and Non Filtered Modes. The option is dimmed in
Non Filtered Mode.
Disabled
System Computer Description
Enabled
Disabled
Enabled
Enabled
Enabled
About
(page 9-1) for software upgrade information.
(page 5-7) tab.
(page 5-12) control panel for the