Screen Control - Honeywell THOR VM1 User Manual

Screen Control

(Start) > Control Panel > Screen (Classic View)
Set screen properties for the Thor VM1.
Factory Default Settings
Screen Blanking (Blackout)
Enable screen blanking
Screen on delay (ms)
COM Port
Automatic Brightness Control
(for outdoor display only)
Enable automatic brightness control
Low to medium light level (%)
Medium to high light level (%)
Current Level
LCD Brightness (%)
Ambient Light (%)
Defroster Control
Enable defroster
Trip point (ºC)
Note: If automatic brightness control is enabled for an outdoor display, the value for LCD brightness depends on the
Ambient Light %.
Note: There is no default value for Ambient Light % as it varies depending on the level of light where the Thor VM1 is
located.
Screen Blanking
Screen blanking allows the Thor VM1 display to automatically be turned off whenever the vehicle is in motion.
Enabled
1000
COM1
Disabled
25
75
100 (see note)
(see note)
Disabled
40ºC
5 - 21