Honeywell THOR VM1 User Manual page 100

Option
Auto Reconnect
About
This panel lists the assigned Computer Friendly Name (that other devices may discover during their Discovery and
Query process), the Bluetooth MAC address, and software version levels. The data cannot be edited by the user.
Using Bluetooth
(Start) > Control Panel > Bluetooth or Bluetooth icon in taskbar or Bluetooth icon on desktop
Tap the Bluetooth icon in the taskbar to open the Bluetooth EZPair application.
or
The Thor VM1 default Bluetooth setting is Enabled.
The Thor VM1 Bluetooth
Prerequisite: The remote Bluetooth devices have been setup to allow them to be "Discovered" and "Connected/
Paired". The System Administrator is familiar with the pairing function of the remote Bluetooth devices.
5 - 12
Function
This option is Enabled (checked) by default. This option controls the overall mobile
Bluetooth device reconnect behavior.
When Auto Reconnect is disabled (unchecked), Auto Reconnect on Boot is auto-
matically disabled and dimmed.
When Auto Reconnect is disabled (unchecked), no devices are reconnected in any
situation. The status of Auto Reconnect on Boot is ignored and no devices are re-
connected on boot. The status of Clear Pairing Table on Boot controls whether the
pairing table is populated on boot.
When Auto Reconnect is enabled (checked) and Auto Reconnect on Boot is dis-
abled (unchecked), devices are not reconnected on boot, but are reconnected in other
situations (example: return from out-of-range).
When Auto Reconnect is enabled (checked) and Clear Pairing Table on Boot is en-
abled (checked), devices are not reconnected on boot, but are reconnected in other
situations (example: return from out-of-range). The pairing table is cleared on boot.
The status of Auto Reconnect on Boot is ignored and the option is automatically dis-
abled (unchecked) and dimmed.
®
module is designed to Discover and pair with nearby Bluetooth devices.