Cleaning; Cleaning The Thor Vm1 And The Dock; Cleaning The Touch Screen; Startup Help - Honeywell THOR VM1 User Manual

4. Enter the "Host Address" of the host system that you wish to connect to. This may either be a DNS name or an IP address
of the host system.
5. Update the telnet port number, if your host application is configured to listen on a specific port. If not, just use the default
telnet port.
6. Select OK.
7. Select Session > Connect from the application menu or tap the "Connect" button on the Tool Bar. Upon a successful
connection, you should see the host application screen displayed.
To change options such as Display, Colors, Cursor, Bar Code, etc., refer to these sections in the RFTerm Reference Guide for
complete descriptions of these and other features.

Cleaning

Cleaning the Thor VM1 and the Dock

Dampen a cloth with the cleaner and then wipe the surface. Do not spray the cleaner directly onto the Thor VM1 or the
dock. Avoid harsh chemicals. The following cleaners are recommended:
®
• Windex Glass Cleaner
®
• Formula 409 All-Purpose Cleaner or Glass and Surface Cleaner
®
• Fantastik All Purpose Cleaner
• Liquid hand soap

Cleaning the Touch Screen

Note: These instructions are for components made of glass. If there is a removable protective film sheet on the display,
remove the film sheet before cleaning the screen.
Keep rough or sharp objects away from the Thor VM1 touch screen and, if installed, the bar code reader scanning aperture.
If the glass becomes soiled or smudged, clean only with a standard household cleaner such as Windex
use isopropyl alcohol. Dampen the cloth with the cleaner and then wipe the surface.
Do not use paper towels or harsh-chemical-based cleaning fluids since they may result in damage to the glass surface. Use
a clean, damp, lint-free cloth.
Do not scrub optical surfaces. If possible, clean only those areas which are soiled. Lint and particulates can be removed
with clean, filtered canned air.

Startup Help

Contact Technical Assistance
Touch screen is not accepting stylus
taps or needs recalibration.
Thor VM1 seems to lockup as soon
as it is rebooted.
2 - 10
(page 9-1) if you need more help.
Press Ctrl+Esc to force the Start Menu to appear. Use the tab, backtab and arrow keys
to move the cursor from element to element.
See Touch Screen Calibration
There may be slight delays while the wireless client connects to the network, authoriza-
tion for voice-enabled applications complete, and Bluetooth relationships establish or re-
establish.
When an application begins, the Thor VM1 is ready for use.
(page 5-25).
®
without vinegar or