I/O Settings - ABB ACS850 Manual

I/O Settings

In the I/O Settings mode, you can:
• check the parameter settings that configure the I/Os of the drive
• check the parameters that have an input or output selected as their source or
target
• edit the parameter setting
• start, stop, change the direction and switch between local and remote control.
How to edit and change parameter settings related to I/O terminals
Step Action
1. Go to the Main menu by pressing
Output mode.
Otherwise press
Main menu.
2. Go the I/O Settings mode by selecting I/O SETTINGS on
the menu with keys
ENTER
.
Select the I/O group, e.g. Digital inputs, with keys
and .
SEL
3. Press . After a brief pause, the display shows the
current settings for the selection.
You can scroll digital inputs and parameters with keys
and
INFO
4. Press . The panel shows information related to I/O
selected (in this case, DI1).
You can scroll information with keys
EXIT
Press to return to the digital inputs.
MENU
if you are in the
EXIT
repeatedly until you get to the
and , and pressing
.
The ACS850 control panel 47
Display
LOC
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT
LOC
Analog outputs
Analog inputs
Digital I/Os
Digital inputs
Relay outputs
EXIT
LOC
Analog outputs
Analog inputs
Digital I/Os
Digital inputs
Relay outputs
EXIT
LOC
DI1
1002 Ext1 start in1
DI2
DI3
1010 Fault reset sel
EXIT
LOC
NUM OF I/O ITEMS
and .
0
SLOT NUMBER
0
NODE NUMBER
EXIT
MAIN MENU
00:00 ENTER
I/O SETTINGS
00:00 SEL
I/O SETTINGS
00:00 SEL
I/O SETTINGS
00:00 INFO
I/O INFO
00:00
1
1
4
1