Changed Parameters - ABB ACS850 Manual

Changed Parameters

In the Changed Parameters mode, you can:
• view a list of all parameters that have been changed from the macro default
values
• change these parameters
• start, stop, change the direction and switch between local and remote control.
How to view and edit changed parameters
Step Action
1. Go to the Main menu by pressing
Output mode.
Otherwise press
Main menu.
2. Go to the Changed Parameters mode by selecting
CHANGED PAR on the menu with keys
, and pressing
If there are no changed parameters in the history,
corresponding text will be shown.
If parameters have been changed, a list of them is
shown. Select the changed parameter on the list with
keys and
parameter is shown below it.
EDIT
3. Press
4. Specify a new value for the parameter with keys
and .
Pressing the key once increments or decrements the
value. Holding the key down changes the value faster.
Pressing the keys simultaneously replaces the displayed
value with the default value.
MENU
EXIT
repeatedly until you get to the
ENTER
.
. The value of the selected
to modify the value.
The ACS850 control panel 33
Display
if you are in the
LOC
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT
LOC
and
No parameters
LOC
9906 Mot nom current
9907 Mot nom voltage
9908 Mot nom freq
9909 Mot nom speed
EXIT
LOC
9906 Mot nom current
CANCEL
LOC
9906 Mot nom current
CANCEL
MAIN MENU
00:00 ENTER
MESSAGE
00:00
CHANGED PAR
3.5 A
EDIT
00:00
PAR EDIT
3.5
A
00:00 SAVE
PAR EDIT
3.0
A
00:00 SAVE
1