Status Line - ABB ACS850 Manual

18 The ACS850 control panel

Status line

The top line of the LCD display shows the basic status information of the drive.
LOC
1 2
No. Field
1 Control location
2 State
3 Panel operation mode
4 Reference value or
number of the
selected item
30.00rpm
4
Alternatives Significance
LOC Drive control is local, that is, from the control panel.
REM Drive control is remote, such as the drive I/O or fieldbus.
Forward shaft direction
Reverse shaft direction
Rotating arrow Drive is running at reference.
Dotted rotating Drive is running but not at reference.
arrow
Stationary arrow Drive is stopped.
Dotted stationary Start command is present, but the motor is not running,
arrow e.g. because start enable signal is missing.
• Name of the current mode
• Name of the list or menu shown
• Name of the operation state, e.g. REF EDIT.
• Reference value in the Output mode
• Number of the highlighted item, e.g mode, parameter
group or fault.
LOC MAIN MENU
1 2 3
1
4