Fault Functions - ABB ACS850 Manual

192 Parameters
No. Name/Value
27.23 Sleep level
-32768.0 ...
32768.0 rpm
27.24 Sleep delay
0.0 ... 360.0 s
27.25 Wake up level
0.0 ... 32768.0
27.26 Wake up delay
0.0 ... 360.0 s
27.27 Sleep ena
DI1
DI2
DI3
DI4
DI5
DI6
Const
Pointer
30

30 Fault functions

30.01 External fault
DI1
DI2
DI3
DI4
DI5
DI6
DIO4
DIO5
DIO6
Description
Defines the start limit for the sleep function. If the motor
speed is below this value longer than the sleep delay
Sleep delay), the drive shifts to the sleep mode.
Sleep start level.
Defines the delay for the sleep start function. See parameter
27.23 Sleep level. When the motor speed falls below the
sleep level, the counter starts. When the motor speed
exceeds the sleep level, the counter resets.
Sleep start delay.
Defines the wake-up limit for the sleep function. The drive
wakes up if the process actual value is above the wake-up
level longer than the wake-up delay
Wake-up level.
Defines the wake-up delay for the sleep function. See
parameter 27.25 Wake up
value falls below the wake-up level, the wake-up counter
starts. When the process actual value exceeds the wake-up
level, the counter resets.
Wake-up delay.
Defines a source that can be used to activate sleep mode
when parameter 27.22 Sleep mode
Digital input DI1 (as indicated by
Digital input DI2 (as indicated by
Digital input DI3 (as indicated by
Digital input DI4 (as indicated by
Digital input DI5 (as indicated by
Digital input DI6 (as indicated by
Bit pointer setting (see Terms and abbreviations
102).
Selects the behavior of the drive upon various fault situations.
Selects an source for an external fault signal.
0 = External fault trip
1 = No external fault
Digital input DI1 (as indicated by
Digital input DI2 (as indicated by
Digital input DI3 (as indicated by
Digital input DI4 (as indicated by
Digital input DI5 (as indicated by
Digital input DI6 (as indicated by
Digital input/output DIO4 (as indicated by
bit 3).
Digital input/output DIO5 (as indicated by
bit 4).
Digital input/output DIO6 (as indicated by
bit 5).
(27.26 Wake up
level. When the process actual
is set to External.
02.01 DI status, bit 0).
02.01 DI status, bit 1).
02.01 DI status, bit 2).
02.01 DI status, bit 3).
02.01 DI status, bit 4).
02.01 DI status, bit 5).
on page
02.01 DI status, bit 0).
02.01 DI status, bit 1).
02.01 DI status, bit 2).
02.01 DI status, bit 3).
02.01 DI status, bit 4).
02.01 DI status, bit 5).
02.03 DIO
02.03 DIO
02.03 DIO
FbEq
(27.24
10 = 1 rpm
10 = 1 s
delay).
10 = 1
10 = 1 s
1073742337
1073807873
1073873409
1073938945
1074004481
1074070017
-
1073742337
1073807873
1073873409
1073938945
1074004481
1074070017
status, 1073938947
status, 1074004483
status, 1074070019