Table of Contents
Advertisement
4.
Insert the new FRUs.
5.
Power on the FRUs.
6.
Verify the FRU status LEDs.
Time and items required
Installing or removing and replacing a power supply and fan assembly should require less than five minutes to complete.
The following items are required to replace a power supply and fan assembly:
•
New power supply and fan assembly (must have the same airflow direction as the power supply and fan assembly being
replaced)
•
#1 Phillips-head screwdriver
Recording power supply and fan assembly critical
information
You can use the following commands to record the power supply and fan assembly configuration and operations information:
•
chassisshow
•
fanshow
•
psshow
•
historyshow
•
tempshow
•
sensorshow
Refer to the Fabric OS Command Reference for output examples and descriptions.
Removing a power supply and fan assembly
Complete the following steps to remove a faulty power supply and fan assembly.
Brocade G620 Hardware Installation Guide
53-1003990-06
Removing a power supply and fan assembly
75
Advertisement
Table of Contents
