Brocade Communications Systems G620 Hardware Installation Manual page 38

Installing the Universal Four-Post Rack Kit (XBR-R000296)
5. Adjust the brackets to the rack depth and tighten all the 6-32 x 1/4-in. screws to a torque of 9 in-lb (10 cm-kg).
FIGURE 12 Attaching the rear brackets to the extensions at the front of the device
1. Rear brackets, short
FIGURE 13 Attaching the short or long rear brackets to the extensions
38
2. Screws, 6-32 x 1/4-in., panhead Phillips
Brocade G620 Hardware Installation Guide
53-1003990-06