Table of Contents
Advertisement
Other
Other
System component
Serial console port
Ethernet management port
USB port
LEDs
System component
System power LED
System status LED
Ethernet port link LED
Ethernet port activity LED
Serial console port LED
FC port status LED
Power supply and fan assembly
status LED
Other
System component
Serial cable
RJ-45 to DB9 adapter
RJ-45 connector
Weight and physical dimensions
Empty weight refers to the device with two power supply and fan assemblies installed but no SFP+ or QSFP transceivers.
Model
Height
Brocade G620 switch
4.39 cm
1.73 inches
Environmental requirements
Condition
Ambient temperature
Relative humidity (non-
condensing)
80
Description
One three-wire (Tx, Rx, Gnd) UART serial port
One 1000/100/10 Base-T port
One external USB port
Description
One green system power status LED (upper) on the port side.
One bicolor (green/amber) system status LED (lower) on the port side.
One link LED on the left of the RJ45 connector. Glows green for 1000 Mbps and amber for 100/10 Mbps.
One activity LED on the right of the RJ45 connector.
The serial console port LEDs remain off at all times, even when a cable is inserted and the link is active.
64 bicolor (green/amber) port status LEDs. One for each SFP+ port and four for each QSFP port on the switch.
One green power supply and fan assembly status LED on each power supply and fan assembly on the nonport-
side of the switch.
Description
RJ-45 console cable
RJ-45 to DB9 for console cable
Uses an RJ-45 connector for the serial port
Width
44.00 cm
17.32 inches
Operational
0°C to 40°C (32°F to 104°F)
10% to 85% at 40°C (104°F)
Depth
Weight (empty)
35.56 cm
7.71 kg
14.00 inches
17.00 lb
Non-operational
-25°C to 70°C (-13°F to 158°F)
10% to 90% non-condensing
Weight (fully loaded)
8.53 kg
18.80 lb
Brocade G620 Hardware Installation Guide
53-1003990-06
Advertisement
Table of Contents
