Table of Contents
Advertisement
10. Install the server system cover. For instructions, see
Cover" on page
11. Plug all peripheral devices and the AC power cable into the server.
Installing a PCIe* Riser Card
1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System Cover" on page
4. Disconnect any cables attached to any add-in cards.
5. Remove the PCIe* Riser assembly. For instructions, see
Riser Assembly" on page
6. Remove any add-in cards from the PCIe* Riser connector. For instructions, see
"Removing a PCI Add-in Card" on page
7. Use two screws to attach the riser card to the riser assembly. See
8. Install an PCI add-in card if desired. For instructions, see
Card" on page
9. Install the PCIe* Riser assembly into the server system. For instructions, see
"Installing the PCIe* Riser Assembly" on page
10. Connect any cables to add-in cards that require them. See your add-in card
documentation for information and add-in card requirements.
11. Re-install the processor air duct. For instructions, see
Duct" on page
12. Install the server system cover. For instructions, see
Cover" on page
13. Plug all peripheral devices and the AC power cable into the server.
54
29.
iii.
28.
Figure 33. Installing Riser Card onto Riser Assembly
55.
31.
29.
®
Intel
Server System R1304BTSSFAN/R1304BTLSFAN/R1304BTLSHBN Service Guide
51.
56.
AF003289
52.
"Installing the Server System
"Removing the Server
"Removing the PCIe*
Figure
33.
"Installing a PCI Add-in
"Installing the Processor Air
"Installing the Server System
"Safety
Advertisement
Table of Contents
