Settings - peplink Balance One User Manual

field to allow or block TCP or UDP traffic from that port only. You can also choose Port
Range and enter a range of ports in the provided fields to allow or deny TCP or UDP traffic
from the specified port range.
IP Address /
If you have chosen IP Address as your firewall rule type, enter the IP address and subnet
Subnet Mask mask identifying the subnet to allow or deny.
If you have chosen MAC Address as your firewall rule type, enter the MAC address
MAC Address
identifying the machine to allow or deny.
13.1.3
SSID
You can select the wireless networks for 2.4 GHz or 5 GHz seperately for each SSID.
This drop-down menu specifies the national/regional regulations which the Wi-Fi radio
should follow.
Operating
Country
NOTE: Users are required to choose an option suitable to local laws and regulations.
Preferred
Indicate the preferred frequency to use for clients to connect.
Frequency
Per FCC regulation, the country selection is not available on all models marketed in
the US. All US models are fixed to US channels only.
http://www.peplink.com

Settings

AP Settings
● If a North American region is selected, RF channels 1 to 11 will be available
and the maximum transmission power will be 26 dBm (400 mW).
● If European region is selected, RF channels 1 to 13 will be available. The
maximum transmission power will be 20 dBm (100 mW).
Important Note
146 Copyright @ 2017 Peplink