Time - peplink Balance One User Manual
For more information, please visit peplink.com
Hide thumbs
Also See for Balance One:
- User manual (261 pages) ,
- Manual (2 pages) ,
- User manual (228 pages)
Table of Contents
Advertisement
There are two ways to upgrade the unit. The first method is through an online download. The
second method is to upload a firmware file manually.
To perform an online download, click on the Check for Firmware button. The Peplink Balance
will check online for new firmware. If new firmware is available, the Peplink Balance will
automatically download the firmware. The rest of the upgrade process will be automatically
initiated.
You may also download a firmware image from the Peplink website and update the unit
manually. To update using a firmware image, click Choose File to select the firmware file from
the local computer, and then click Manual Upgrade to send the firmware to the Peplink Balance.
It will then automatically initiate the firmware upgrade process.
Please note that all Peplink devices can store two different firmware versions in two different
partitions. A firmware upgrade will always replace the inactive partition. If you want to keep the
inactive firmware, you can simply reboot your device with the inactive firmware and then
perform the firmware upgrade.
Status LED Information during firmware upgrade:
●
OFF – Firmware upgrade in progress (DO NOT disconnect power.)
●
Red
– Unit is rebooting
●
Green
– Firmware upgrade successfully completed
The firmware upgrade process may not necessarily preserve the previous configuration, and the behavior varies on
a case-by-case basis. Consult the release notes for the particular firmware version before installing. Do not
disconnect the power during firmware upgrade process. Do not attempt to upload a non-firmware file or a firmware
file that is not supported by Peplink. Upgrading the Peplink Balance with an invalid firmware file will damage the unit
and may void the warranty.
14.1.3
The time server functionality enables the system clock of the Peplink Balance to be
synchronized with a specified time server. The settings for time server configuration are located
http://www.peplink.com
Firmware Upgrade Status
Important Note
Time
162
Copyright @ 2017 Peplink
Advertisement
Table of Contents
